Some excellent ideas and approaches to this problem. The first part of the problem (when the triangle is larger than the square) is fairly accessible; as is the part where the two equal sides of the triangle shrink to less than half the length of the side of the square but the bit in between is tricky!!
The first solution offered below is based on the work of Thomas Davies, Hannah McKenzie, Elliot Husband, Lizzie Farnham and Hannah Bradley of Madras college The group also spent time looking at what happens as the triangle shrinks (not so easy). Well done to all of you.
The second solution is from Andrei Lazanu of School 205, Bucharest. Thank you for this Andrei
Other excellent solutions were received from Alison Colvin, Sheila Norrie and Shona Leenhouts, also of Madras College, who have partly answered one of the January problems (if you tackle this problem you can refer to what you did for tilting traingles). I think the January version is a little easier.
We believed that the triangle took up a quarter of the square, and that a total of four triangles could fit around the square. We created a moving example:
We started by rotating a square inside the four triangles as this has the same effect as rotatiing the triangle (editors note:I "liked this bit of lateral thinking").
From our "moving" representation (Fig. 1) we could see that it is always possible to fit four right angled triangles around the centre of the square. This is because the centre of the square allows a 360° rotation and, as the traingles are right angled, they have angles of 90° (360 ÷ 90 = 4).
|
|
|
|
Fig. 1
|
Fig. 2
|
Fig. 3
|
We believed that a quarter of the square was overlapped by each triangle and we set out to prove this.
First we placed the triangle in a simple position on the square (Fig. 2). We could clearly see that the green area of the triangle is a quarter of the square - and what about the yellow and red areas?...
We suspected that they added up to another quarter. To show this we cut out the areas and stuck them on to the square (Fig. 3). This showed that the yellow and green areas also took up a quarter of the square and the the whole triangle took up half the square.
We soon realised that this was only an example for one position of the triangle - we needed to look at the bigger picture.
As can be seen the square
in the middle of the four triangles is 2 units by 2 units. This
means that the overlap of each of the four triangles is congruent
and makes up a quarter of the square.
As the four triangles fit on the square at all times the overlap of the triangles onto the square must always be a quarter of the square which is equal to 1 square unit.
In our write up we have shown that 4 triangles can fit around the square and that the area of overlap is 1 square unit. This is always true as long as the sides of the triangle are 2 units.
To find the length of the diagonal of a square of side 2, using the Pythagorean Theorem:
22 + 22 = d2
So,
d = 2Ö2
1. Starting with the triangle with the two equal sides 2 units in length.
1a) If the hypotenuse of the isosceles triangle is parallel to one side of the square.
This means the equal sides of the
isosceles triangle are on the diagonal of the square; the area of
the square occupied by the triangle is the area of the right
-angled isosceles triangle, of side half the diagonal.
This means that half the diagonal is
Ö2
units. The area of the triangle is
|
1b) The triangle is in a tilted position.
Triangles AMB and CMD are congruent, because they are formed by
the rotation of triangle FMG. This means their areas are equal. So,
the area of the square occupied by the triangle is the same.
Any position could be reduced to position a).
1c) The equal sides of the triangle are parallel to the sides of
the square.
It is very clear that the triangle forms in the square a smaller
square of area
1
unit2
.
2. The congruent sides of the triangle are
Ö2
units.
2a) The hypotenuse of the isosceles triangle is parallel to one side of the square.
As seen from 1a, this is a particular case. The hypotenuse of this triangle is the side of the square, also having the same area as in 1a.
2b) The triangle has a tilted position.
In this part of the problem, the area of the square covered by the triangle is smaller than 1 unit2 .
2c) The equal sides are parallel to the sides of the square.
Triangles ACB and AGF are both isosceles
right-angled triangles, with equal sides of
Ö2 - 1 units
because they are right-angled triangles with 45° angle. So,
BDE is also a right-angled triangle with the congruent sides:
1 - (Ö2-1) = 2 - Ö2
The area of the polygon BCMGE is the area of quadrilateral DCMG minus the area of triangle BDE. This is:
| 1 - |
(2 - Ö2)2 2 | = 1 - |
4 + 2 - 4Ö2 2 | = 1 - (3 - 2Ö2) = 2Ö2 - 2 \units2 |
3. Here, I must find the limit where the area of the triangle is all inside the square. This happens when triangle MAF is the same as triangle MCG. This happens when the congruent sides of the right-angled isosceles triangle are 1 unit. If I reduce further the side of the triangle, all the triangle will be inside the square.